VNV20N07TR-E STMicroelectronics IC PWR MOSFET M0 70V 20A PWRSO10
Integraallülitused (IC-d)
Tootja number:
VNV20N07TR-E
Tootja:
Tootekategooria:
Kirjeldus:
IC PWR MOSFET M0 70V 20A PWRSO10
RoHs olek:
Pliivaba / RoHS-iga ühilduv Andmetabelid:
VNV20N07TR-E Andmetabelid(PDF)
Funktsioonid :
-
Liides :
On/Off
Lüliti tüüp :
General Purpose
Osa olek :
Active
Pakend/ümbris :
PowerSO-10 Exposed Bottom Pad
Pakendamine :
Tape & Reel (TR)
Pinge – koormus :
55V (Max)
Pinge – toide (Vcc/Vdd) :
Not Required
Praegune – väljund (maksimaalne) :
14A
Rds sees (tüüp) :
50 mOhm (Max)
seeria :
OMNIFET™, VIPower™
Sisendtüüp :
Non-Inverting
Suhe – sisend:väljund :
1:1
Tarnija seadmepakett :
10-PowerSO
Töötemperatuur :
-
Väljundi konfiguratsioon :
Low Side
Väljundi tüüp :
N-Channel
Väljundite arv :
1
Veakaitse :
Current Limiting (Fixed), Over Temperature, Over Voltage
Laos
54,866
Ühiku hind:
Võtke meiega ühendust Pakkumine
VNV20N07TR-E Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele VNV20N07TR-E konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc VNV20N07TR-E. Parima hinna saamiseks saidil VNV20N07TR-E võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
VNV20N07TR-E Iseärasused
VNV20N07TR-E is produced by STMicroelectronics, belongs to PMIC – toitejaotuslülitid, koormuse draiverid.
VNV20N07TR-E Toote üksikasjad
:
VNV20N07TR-E – PMIC – toitejaotuslülitid, koormuse draiverid disainitud puhvervõimendid ja toodetud STMicroelectronics.
VNV20N07TR-E, mida pakub STMicroelectronics, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC VNV20N07TR-E on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis VNV20N07TR-E (PDF), hind VNV20N07TR-E, Pinout VNV20N07TR-E, manuaal VNV20N07TR-E Ja VNV20N07TR-E asenduslahendus.
VNV20N07TR-E, mida pakub STMicroelectronics, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC VNV20N07TR-E on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis VNV20N07TR-E (PDF), hind VNV20N07TR-E, Pinout VNV20N07TR-E, manuaal VNV20N07TR-E Ja VNV20N07TR-E asenduslahendus.
VNV20N07TR-E FAQ
:
1. What is the maximum drain-source voltage for VNV20N07TR-E?
The maximum drain-source voltage for VNV20N07TR-E is 70 volts.
2. What is the continuous drain current rating for VNV20N07TR-E?
The continuous drain current rating for VNV20N07TR-E is 20 amperes.
3. What is the on-state resistance of VNV20N07TR-E at a specified temperature and current?
The on-state resistance of VNV20N07TR-E is typically specified at a certain temperature and current, which can be found in the datasheet provided by the manufacturer.
4. Can VNV20N07TR-E handle high-temperature environments?
VNV20N07TR-E is designed to operate within specific temperature ranges as outlined in the datasheet. It is important to adhere to these guidelines for optimal performance and reliability.
5. What are the typical applications for VNV20N07TR-E?
VNV20N07TR-E is commonly used in power management and conversion applications, motor control, and other industrial electronics where high-current switching is required.
6. Does VNV20N07TR-E require external heat sinking for certain operating conditions?
Depending on the application and operating conditions, external heat sinking may be necessary to ensure that VNV20N07TR-E operates within its specified temperature limits.
7. Is VNV20N07TR-E suitable for automotive applications?
VNV20N07TR-E is designed to meet automotive industry standards and can be used in various automotive electronic systems, subject to compliance with relevant automotive regulations and standards.
8. What are the key features that distinguish VNV20N07TR-E from similar semiconductor devices?
VNV20N07TR-E offers low on-state resistance, high current handling capability, and robustness, making it suitable for demanding power electronics applications.
9. Are there any recommended circuit layouts or PCB design considerations for using VNV20N07TR-E?
The manufacturer typically provides guidelines for PCB layout and design considerations in the datasheet to optimize the performance and reliability of VNV20N07TR-E in a given application.
10. How can I ensure proper handling and ESD protection when working with VNV20N07TR-E?
It is important to follow proper ESD handling procedures and guidelines outlined in the datasheet and industry best practices to prevent damage to VNV20N07TR-E during assembly and installation processes.
The maximum drain-source voltage for VNV20N07TR-E is 70 volts.
2. What is the continuous drain current rating for VNV20N07TR-E?
The continuous drain current rating for VNV20N07TR-E is 20 amperes.
3. What is the on-state resistance of VNV20N07TR-E at a specified temperature and current?
The on-state resistance of VNV20N07TR-E is typically specified at a certain temperature and current, which can be found in the datasheet provided by the manufacturer.
4. Can VNV20N07TR-E handle high-temperature environments?
VNV20N07TR-E is designed to operate within specific temperature ranges as outlined in the datasheet. It is important to adhere to these guidelines for optimal performance and reliability.
5. What are the typical applications for VNV20N07TR-E?
VNV20N07TR-E is commonly used in power management and conversion applications, motor control, and other industrial electronics where high-current switching is required.
6. Does VNV20N07TR-E require external heat sinking for certain operating conditions?
Depending on the application and operating conditions, external heat sinking may be necessary to ensure that VNV20N07TR-E operates within its specified temperature limits.
7. Is VNV20N07TR-E suitable for automotive applications?
VNV20N07TR-E is designed to meet automotive industry standards and can be used in various automotive electronic systems, subject to compliance with relevant automotive regulations and standards.
8. What are the key features that distinguish VNV20N07TR-E from similar semiconductor devices?
VNV20N07TR-E offers low on-state resistance, high current handling capability, and robustness, making it suitable for demanding power electronics applications.
9. Are there any recommended circuit layouts or PCB design considerations for using VNV20N07TR-E?
The manufacturer typically provides guidelines for PCB layout and design considerations in the datasheet to optimize the performance and reliability of VNV20N07TR-E in a given application.
10. How can I ensure proper handling and ESD protection when working with VNV20N07TR-E?
It is important to follow proper ESD handling procedures and guidelines outlined in the datasheet and industry best practices to prevent damage to VNV20N07TR-E during assembly and installation processes.
VNV20N07TR-E Seotud märksõnad
:
VNV20N07TR-E Hind
VNV20N07TR-E Maalimine
VNV20N07TR-E Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "VNV2" seeria tooteid
