93LC46B/W Microchip Technology SERIAL EEPROM WAFER
Integraallülitused (IC-d)
Tootja number:
93LC46B/W
Tootja:
Tootekategooria:
Kirjeldus:
SERIAL EEPROM WAFER
RoHs olek:
Pliivaba / RoHS-iga ühilduv Andmetabelid:
93LC46B/W Andmetabelid(PDF)
Juurdepääsu aeg :
-
Kella sagedus :
2MHz
Mälu liides :
SPI
Mälu suurus :
1Kb (64 x 16)
Mälu tüüp :
Non-Volatile
Mälu vorming :
EEPROM
Osa olek :
Active
Paigaldustüüp :
-
Pakend/ümbris :
-
Pakendamine :
-
Pinge – toide :
2.5 V ~ 5.5 V
seeria :
-
Tarnija seadmepakett :
-
Tehnoloogia :
EEPROM
Töötemperatuur :
0°C ~ 70°C (TA)
Tsükli aja kirjutamine – sõna, leht :
6ms
Laos
46,028
Ühiku hind:
Võtke meiega ühendust Pakkumine
93LC46B/W Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele 93LC46B/W konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc 93LC46B/W. Parima hinna saamiseks saidil 93LC46B/W võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
93LC46B/W Iseärasused
93LC46B/W is produced by Microchip Technology, belongs to Mälu.
93LC46B/W Toote üksikasjad
:
93LC46B/W – Mälu disainitud puhvervõimendid ja toodetud Microchip Technology.
93LC46B/W, mida pakub Microchip Technology, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC 93LC46B/W on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis 93LC46B/W (PDF), hind 93LC46B/W, Pinout 93LC46B/W, manuaal 93LC46B/W Ja 93LC46B/W asenduslahendus.
93LC46B/W, mida pakub Microchip Technology, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC 93LC46B/W on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis 93LC46B/W (PDF), hind 93LC46B/W, Pinout 93LC46B/W, manuaal 93LC46B/W Ja 93LC46B/W asenduslahendus.
93LC46B/W FAQ
:
1. What is the function of the 93LC46B/W semiconductor?
The 93LC46B/W is a serial electrically erasable programmable read-only memory (EEPROM) that provides non-volatile data storage for various electronic devices.
2. What are the key features of the 93LC46B/W semiconductor?
The 93LC46B/W offers a 1K-bit memory array, low power consumption, and a wide operating voltage range, making it suitable for use in diverse applications.
3. How does the 93LC46B/W interface with microcontrollers or other devices?
The 93LC46B/W utilizes a simple 3-wire serial interface, enabling easy communication with microcontrollers and other integrated circuits.
4. What are the typical operating conditions for the 93LC46B/W semiconductor?
The 93LC46B/W operates within a temperature range of -40°C to 125°C and requires a supply voltage between 2.5V and 5.5V for proper functionality.
5. Can the 93LC46B/W semiconductor withstand environmental stress and mechanical shock?
Yes, the 93LC46B/W is designed to withstand environmental stress and mechanical shock, ensuring reliable performance in challenging conditions.
6. How does the 93LC46B/W manage data integrity and security?
The 93LC46B/W incorporates built-in protection mechanisms such as write protection and error detection/correction to ensure data integrity and security.
7. What are the typical applications of the 93LC46B/W semiconductor?
The 93LC46B/W is commonly used in automotive electronics, industrial control systems, consumer electronics, and various embedded systems requiring non-volatile memory storage.
8. Can the 93LC46B/W semiconductor be reprogrammed multiple times?
Yes, the 93LC46B/W supports multiple reprogramming cycles, allowing for flexibility in data storage and updates.
9. How does the 93LC46B/W semiconductor manage power consumption during standby mode?
The 93LC46B/W features a low standby current, minimizing power consumption when not actively writing or reading data.
10. Are there any special considerations for integrating the 93LC46B/W into a new design?
When integrating the 93LC46B/W, attention should be given to proper decoupling, signal integrity, and adherence to recommended operating conditions for optimal performance and longevity.
The 93LC46B/W is a serial electrically erasable programmable read-only memory (EEPROM) that provides non-volatile data storage for various electronic devices.
2. What are the key features of the 93LC46B/W semiconductor?
The 93LC46B/W offers a 1K-bit memory array, low power consumption, and a wide operating voltage range, making it suitable for use in diverse applications.
3. How does the 93LC46B/W interface with microcontrollers or other devices?
The 93LC46B/W utilizes a simple 3-wire serial interface, enabling easy communication with microcontrollers and other integrated circuits.
4. What are the typical operating conditions for the 93LC46B/W semiconductor?
The 93LC46B/W operates within a temperature range of -40°C to 125°C and requires a supply voltage between 2.5V and 5.5V for proper functionality.
5. Can the 93LC46B/W semiconductor withstand environmental stress and mechanical shock?
Yes, the 93LC46B/W is designed to withstand environmental stress and mechanical shock, ensuring reliable performance in challenging conditions.
6. How does the 93LC46B/W manage data integrity and security?
The 93LC46B/W incorporates built-in protection mechanisms such as write protection and error detection/correction to ensure data integrity and security.
7. What are the typical applications of the 93LC46B/W semiconductor?
The 93LC46B/W is commonly used in automotive electronics, industrial control systems, consumer electronics, and various embedded systems requiring non-volatile memory storage.
8. Can the 93LC46B/W semiconductor be reprogrammed multiple times?
Yes, the 93LC46B/W supports multiple reprogramming cycles, allowing for flexibility in data storage and updates.
9. How does the 93LC46B/W semiconductor manage power consumption during standby mode?
The 93LC46B/W features a low standby current, minimizing power consumption when not actively writing or reading data.
10. Are there any special considerations for integrating the 93LC46B/W into a new design?
When integrating the 93LC46B/W, attention should be given to proper decoupling, signal integrity, and adherence to recommended operating conditions for optimal performance and longevity.
93LC46B/W Seotud märksõnad
:
93LC46B/W Hind
93LC46B/W Maalimine
93LC46B/W Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "93LC" seeria tooteid
