IPS512G Infineon Technologies IC MOSFET HS PWR SW 5A 16-SOIC
Integraallülitused (IC-d)
Tootja number:
IPS512G
Tootja:
Tootekategooria:
Kirjeldus:
IC MOSFET HS PWR SW 5A 16-SOIC
RoHs olek:
Andmetabelid:
IPS512G Andmetabelid(PDF)
Funktsioonid :
Auto Restart
Liides :
On/Off
Lüliti tüüp :
General Purpose
Osa olek :
Obsolete
Pakend/ümbris :
16-SOIC (0.154", 3.90mm Width)
Pakendamine :
Tube
Pinge – koormus :
5.5 V ~ 35 V
Pinge – toide (Vcc/Vdd) :
Not Required
Praegune – väljund (maksimaalne) :
1A
Rds sees (tüüp) :
130 mOhm
seeria :
-
Sisendtüüp :
Non-Inverting
Suhe – sisend:väljund :
1:1
Tarnija seadmepakett :
16-SOIC
Töötemperatuur :
-40°C ~ 150°C (TJ)
Väljundi konfiguratsioon :
High Side
Väljundi tüüp :
N-Channel
Väljundite arv :
2
Veakaitse :
Current Limiting (Fixed), Open Load Detect, Over Temperature
Laos
22,888
Ühiku hind:
Võtke meiega ühendust Pakkumine
IPS512G Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele IPS512G konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc IPS512G. Parima hinna saamiseks saidil IPS512G võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
IPS512G Iseärasused
IPS512G is produced by Infineon Technologies, belongs to PMIC – toitejaotuslülitid, koormuse draiverid.
IPS512G Toote üksikasjad
:
IPS512G – PMIC – toitejaotuslülitid, koormuse draiverid disainitud puhvervõimendid ja toodetud Infineon Technologies.
IPS512G, mida pakub Infineon Technologies, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC IPS512G on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis IPS512G (PDF), hind IPS512G, Pinout IPS512G, manuaal IPS512G Ja IPS512G asenduslahendus.
IPS512G, mida pakub Infineon Technologies, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC IPS512G on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis IPS512G (PDF), hind IPS512G, Pinout IPS512G, manuaal IPS512G Ja IPS512G asenduslahendus.
IPS512G FAQ
:
1. What is IPS512G and what are its main features?
IPS512G is a type of discrete semiconductor, specifically a power MOSFET. It is designed for high-speed switching applications and offers low on-state resistance, fast switching speed, and high reliability.
2. What are the typical applications for IPS512G?
IPS512G is commonly used in power management circuits, motor control systems, and other applications that require efficient power switching and control.
3. What is the maximum voltage and current rating for IPS512G?
The maximum voltage rating for IPS512G is typically around 100V, while the maximum continuous drain current can range from 10A to 50A, depending on the specific model.
4. How does IPS512G compare to other similar discrete semiconductors?
IPS512G offers competitive performance in terms of on-state resistance, switching speed, and thermal characteristics compared to other power MOSFETs in its class.
5. What are the key thermal considerations when using IPS512G?
Proper heat sinking and thermal management are crucial for ensuring the reliable operation of IPS512G, especially in high-power or high-frequency applications.
6. Can IPS512G be used in parallel to increase current handling capability?
Yes, IPS512G can be used in parallel to share the load and increase the overall current handling capability, but careful attention must be paid to ensure balanced current sharing and thermal management.
7. What are the recommended soldering and mounting techniques for IPS512G?
Soldering should be performed using industry-standard techniques, and proper mounting hardware should be used to ensure good thermal contact and mechanical stability.
8. Are there any special considerations for driving IPS512G in high-frequency applications?
In high-frequency applications, attention should be given to minimizing parasitic inductance and capacitance in the circuit layout to optimize the switching performance of IPS512G.
9. What are the typical failure modes for IPS512G and how can they be mitigated?
Common failure modes include overcurrent stress, thermal overstress, and voltage spikes. Proper circuit protection, thermal design, and derating guidelines can help mitigate these risks.
10. Where can I find detailed technical specifications and application notes for IPS512G?
Detailed technical specifications and application notes for IPS512G can be found in the product datasheet and application notes provided by the manufacturer.
IPS512G is a type of discrete semiconductor, specifically a power MOSFET. It is designed for high-speed switching applications and offers low on-state resistance, fast switching speed, and high reliability.
2. What are the typical applications for IPS512G?
IPS512G is commonly used in power management circuits, motor control systems, and other applications that require efficient power switching and control.
3. What is the maximum voltage and current rating for IPS512G?
The maximum voltage rating for IPS512G is typically around 100V, while the maximum continuous drain current can range from 10A to 50A, depending on the specific model.
4. How does IPS512G compare to other similar discrete semiconductors?
IPS512G offers competitive performance in terms of on-state resistance, switching speed, and thermal characteristics compared to other power MOSFETs in its class.
5. What are the key thermal considerations when using IPS512G?
Proper heat sinking and thermal management are crucial for ensuring the reliable operation of IPS512G, especially in high-power or high-frequency applications.
6. Can IPS512G be used in parallel to increase current handling capability?
Yes, IPS512G can be used in parallel to share the load and increase the overall current handling capability, but careful attention must be paid to ensure balanced current sharing and thermal management.
7. What are the recommended soldering and mounting techniques for IPS512G?
Soldering should be performed using industry-standard techniques, and proper mounting hardware should be used to ensure good thermal contact and mechanical stability.
8. Are there any special considerations for driving IPS512G in high-frequency applications?
In high-frequency applications, attention should be given to minimizing parasitic inductance and capacitance in the circuit layout to optimize the switching performance of IPS512G.
9. What are the typical failure modes for IPS512G and how can they be mitigated?
Common failure modes include overcurrent stress, thermal overstress, and voltage spikes. Proper circuit protection, thermal design, and derating guidelines can help mitigate these risks.
10. Where can I find detailed technical specifications and application notes for IPS512G?
Detailed technical specifications and application notes for IPS512G can be found in the product datasheet and application notes provided by the manufacturer.
IPS512G Seotud märksõnad
:
IPS512G Hind
IPS512G Maalimine
IPS512G Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "IPS5" seeria tooteid
