IPS511 Infineon Technologies IC MOSFET HS PWR SW 5A TO-220-5
Integraallülitused (IC-d)
Tootja number:
IPS511
Tootja:
Tootekategooria:
Kirjeldus:
IC MOSFET HS PWR SW 5A TO-220-5
RoHs olek:
Andmetabelid:
IPS511 Andmetabelid(PDF)
Funktsioonid :
Auto Restart
Liides :
On/Off
Lüliti tüüp :
General Purpose
Osa olek :
Obsolete
Pakend/ümbris :
TO-220-5
Pakendamine :
Tube
Pinge – koormus :
5.5 V ~ 35 V
Pinge – toide (Vcc/Vdd) :
Not Required
Praegune – väljund (maksimaalne) :
1.7A
Rds sees (tüüp) :
110 mOhm
seeria :
-
Sisendtüüp :
Non-Inverting
Suhe – sisend:väljund :
1:1
Tarnija seadmepakett :
TO-220AB (5-LEAD)
Töötemperatuur :
-40°C ~ 150°C (TJ)
Väljundi konfiguratsioon :
High Side
Väljundi tüüp :
N-Channel
Väljundite arv :
1
Veakaitse :
Current Limiting (Fixed), Open Load Detect, Over Temperature
Laos
18,538
Ühiku hind:
Võtke meiega ühendust Pakkumine
IPS511 Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele IPS511 konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc IPS511. Parima hinna saamiseks saidil IPS511 võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
IPS511 Iseärasused
IPS511 is produced by Infineon Technologies, belongs to PMIC – toitejaotuslülitid, koormuse draiverid.
IPS511 Toote üksikasjad
:
IPS511 – PMIC – toitejaotuslülitid, koormuse draiverid disainitud puhvervõimendid ja toodetud Infineon Technologies.
IPS511, mida pakub Infineon Technologies, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC IPS511 on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis IPS511 (PDF), hind IPS511, Pinout IPS511, manuaal IPS511 Ja IPS511 asenduslahendus.
IPS511, mida pakub Infineon Technologies, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC IPS511 on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis IPS511 (PDF), hind IPS511, Pinout IPS511, manuaal IPS511 Ja IPS511 asenduslahendus.
IPS511 FAQ
:
1. What is IPS511 and what are its main applications?
IPS511 is a discrete semiconductor device commonly used in power management applications, such as voltage regulation and current control in electronic circuits.
2. What are the key electrical specifications of IPS511?
The key electrical specifications of IPS511 include its maximum voltage rating, current handling capability, on-state voltage drop, and thermal resistance.
3. How does IPS511 compare to other similar semiconductor devices in terms of performance and efficiency?
IPS511 offers competitive performance and efficiency compared to other similar devices, with its unique combination of voltage/current ratings and low on-state resistance.
4. What are the typical operating conditions for IPS511?
IPS511 is typically operated within a specified range of voltage, current, and temperature, ensuring optimal performance and reliability in various applications.
5. What are the recommended mounting and thermal management practices for IPS511?
Proper mounting techniques, such as using appropriate heatsinks and thermal interface materials, are crucial for maintaining the temperature of IPS511 within safe limits during operation.
6. Can IPS511 be used in parallel or series configurations for higher power applications?
Yes, IPS511 can be configured in parallel or series to increase current handling capability or voltage rating, respectively, in high-power applications.
7. What are the common failure modes of IPS511 and how can they be mitigated?
Common failure modes of IPS511 include overcurrent, overvoltage, and thermal overstress. These can be mitigated by implementing proper protection circuits and thermal management strategies.
8. Are there any specific layout considerations when designing a circuit using IPS511?
Careful attention should be given to the layout of the circuit to minimize parasitic effects, optimize current paths, and ensure proper heat dissipation for IPS511.
9. What are the industry standards and certifications relevant to IPS511?
IPS511 may comply with industry standards such as JEDEC, RoHS, and specific application-related certifications, depending on the intended use and market requirements.
10. Where can I find detailed technical documentation and support for IPS511?
Detailed technical documentation, including datasheets, application notes, and support resources for IPS511, can be obtained from the manufacturer's official website or authorized distributors.
IPS511 is a discrete semiconductor device commonly used in power management applications, such as voltage regulation and current control in electronic circuits.
2. What are the key electrical specifications of IPS511?
The key electrical specifications of IPS511 include its maximum voltage rating, current handling capability, on-state voltage drop, and thermal resistance.
3. How does IPS511 compare to other similar semiconductor devices in terms of performance and efficiency?
IPS511 offers competitive performance and efficiency compared to other similar devices, with its unique combination of voltage/current ratings and low on-state resistance.
4. What are the typical operating conditions for IPS511?
IPS511 is typically operated within a specified range of voltage, current, and temperature, ensuring optimal performance and reliability in various applications.
5. What are the recommended mounting and thermal management practices for IPS511?
Proper mounting techniques, such as using appropriate heatsinks and thermal interface materials, are crucial for maintaining the temperature of IPS511 within safe limits during operation.
6. Can IPS511 be used in parallel or series configurations for higher power applications?
Yes, IPS511 can be configured in parallel or series to increase current handling capability or voltage rating, respectively, in high-power applications.
7. What are the common failure modes of IPS511 and how can they be mitigated?
Common failure modes of IPS511 include overcurrent, overvoltage, and thermal overstress. These can be mitigated by implementing proper protection circuits and thermal management strategies.
8. Are there any specific layout considerations when designing a circuit using IPS511?
Careful attention should be given to the layout of the circuit to minimize parasitic effects, optimize current paths, and ensure proper heat dissipation for IPS511.
9. What are the industry standards and certifications relevant to IPS511?
IPS511 may comply with industry standards such as JEDEC, RoHS, and specific application-related certifications, depending on the intended use and market requirements.
10. Where can I find detailed technical documentation and support for IPS511?
Detailed technical documentation, including datasheets, application notes, and support resources for IPS511, can be obtained from the manufacturer's official website or authorized distributors.
IPS511 Seotud märksõnad
:
IPS511 Hind
IPS511 Maalimine
IPS511 Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "IPS5" seeria tooteid
