AMP02FP Analog Devices Inc. IC OPAMP INSTR 1.2MHZ 8DIP
Integraallülitused (IC-d)
Tootja number:
AMP02FP
Tootja:
Tootekategooria:
Kirjeldus:
IC OPAMP INSTR 1.2MHZ 8DIP
RoHs olek:
Andmetabelid:
AMP02FP Andmetabelid(PDF)
-3 db ribalaius :
1.2MHz
Osa olek :
Obsolete
Paigaldustüüp :
Through Hole
Pakend/ümbris :
8-DIP (0.300", 7.62mm)
Pakendamine :
Tube
Pinge – sisendi nihe :
40µV
Pinge – toide, üks/kaks (±) :
±4.5 V ~ 18 V
Pöördekiirus :
6 V/µs
Praegune – pakkumine :
5mA
Praegune – sisendi kallutatus :
4nA
Praegune – väljund / kanal :
32mA
Ribalaiuse suurendamise toode :
-
seeria :
-
Tarnija seadmepakett :
8-PDIP
Töötemperatuur :
-40°C ~ 85°C
Väljundi tüüp :
-
Võimendi tüüp :
Instrumentation
Vooluahelate arv :
1
Laos
53,542
Ühiku hind:
Võtke meiega ühendust Pakkumine
AMP02FP Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele AMP02FP konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc AMP02FP. Parima hinna saamiseks saidil AMP02FP võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
AMP02FP Iseärasused
AMP02FP is produced by Analog Devices Inc., belongs to Lineaarne – võimendid – mõõteriistad, OP-võimendid, puhvervõimendid.
AMP02FP Toote üksikasjad
:
AMP02FP – Lineaarne – võimendid – mõõteriistad, OP-võimendid, puhvervõimendid disainitud puhvervõimendid ja toodetud Analog Devices Inc..
AMP02FP, mida pakub Analog Devices Inc., saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC AMP02FP on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis AMP02FP (PDF), hind AMP02FP, Pinout AMP02FP, manuaal AMP02FP Ja AMP02FP asenduslahendus.
AMP02FP, mida pakub Analog Devices Inc., saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC AMP02FP on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis AMP02FP (PDF), hind AMP02FP, Pinout AMP02FP, manuaal AMP02FP Ja AMP02FP asenduslahendus.
AMP02FP FAQ
:
1. What is the maximum supply voltage for the AMP02FP?
The maximum supply voltage for the AMP02FP is ±18V.
2. What is the typical input offset voltage of the AMP02FP?
The typical input offset voltage of the AMP02FP is 150μV.
3. Can the AMP02FP operate with a single power supply?
No, the AMP02FP requires a dual power supply.
4. What is the common-mode rejection ratio (CMRR) of the AMP02FP?
The CMRR of the AMP02FP is typically 120dB.
5. What is the maximum operating temperature range for the AMP02FP?
The AMP02FP can operate within a temperature range of -40°C to 85°C.
6. Does the AMP02FP require external compensation?
No, the AMP02FP is internally compensated and does not require external compensation.
7. What is the typical input bias current of the AMP02FP?
The typical input bias current of the AMP02FP is 20nA.
8. What is the maximum output current of the AMP02FP?
The maximum output current of the AMP02FP is ±25mA.
9. Can the AMP02FP be used in precision instrumentation applications?
Yes, the AMP02FP is suitable for precision instrumentation applications due to its low offset voltage and drift.
10. What is the package type of the AMP02FP?
The AMP02FP is available in a standard 8-pin plastic DIP package.
The maximum supply voltage for the AMP02FP is ±18V.
2. What is the typical input offset voltage of the AMP02FP?
The typical input offset voltage of the AMP02FP is 150μV.
3. Can the AMP02FP operate with a single power supply?
No, the AMP02FP requires a dual power supply.
4. What is the common-mode rejection ratio (CMRR) of the AMP02FP?
The CMRR of the AMP02FP is typically 120dB.
5. What is the maximum operating temperature range for the AMP02FP?
The AMP02FP can operate within a temperature range of -40°C to 85°C.
6. Does the AMP02FP require external compensation?
No, the AMP02FP is internally compensated and does not require external compensation.
7. What is the typical input bias current of the AMP02FP?
The typical input bias current of the AMP02FP is 20nA.
8. What is the maximum output current of the AMP02FP?
The maximum output current of the AMP02FP is ±25mA.
9. Can the AMP02FP be used in precision instrumentation applications?
Yes, the AMP02FP is suitable for precision instrumentation applications due to its low offset voltage and drift.
10. What is the package type of the AMP02FP?
The AMP02FP is available in a standard 8-pin plastic DIP package.
AMP02FP Seotud märksõnad
:
AMP02FP Hind
AMP02FP Maalimine
AMP02FP Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "AMP0" seeria tooteid
