VIPER50ASP-E STMicroelectronics IC SWIT PWM SMPS CM POWERSO10
Integraallülitused (IC-d)
Tootja number:
VIPER50ASP-E
Tootja:
Tootekategooria:
Kirjeldus:
IC SWIT PWM SMPS CM POWERSO10
RoHs olek:
Pliivaba / RoHS-iga ühilduv Andmetabelid:
VIPER50ASP-E Andmetabelid(PDF)
Juhtimisfunktsioonid :
Frequency Control, Soft Start, Sync
Osa olek :
Obsolete
Paigaldustüüp :
Surface Mount
Pakend/ümbris :
PowerSO-10 Exposed Bottom Pad
Pakendamine :
Tube
Pinge – käivitamine :
11V
Pinge – rike :
700V
Pinge – toide (Vcc/Vdd) :
8 V ~ 15 V
Sagedus – ümberlülitamine :
Up to 200kHz
seeria :
VIPER™
Sisemised lülitid :
Yes
Tarnija seadmepakett :
10-PowerSO
Töötemperatuur :
-
Töötsükkel :
-
Väljundi isoleerimine :
Isolated
Veakaitse :
Current Limiting, Over Temperature
Võimsus (vatti) :
50W
Topoloogia :
Flyback
Laos
33,112
Ühiku hind:
Võtke meiega ühendust Pakkumine
VIPER50ASP-E Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele VIPER50ASP-E konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc VIPER50ASP-E. Parima hinna saamiseks saidil VIPER50ASP-E võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
VIPER50ASP-E Iseärasused
VIPER50ASP-E is produced by STMicroelectronics, belongs to DC-DC muundurid PMIC - AC, eraldiseisvad lülitid.
VIPER50ASP-E Toote üksikasjad
:
VIPER50ASP-E – DC-DC muundurid PMIC - AC, eraldiseisvad lülitid disainitud puhvervõimendid ja toodetud STMicroelectronics.
VIPER50ASP-E, mida pakub STMicroelectronics, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC VIPER50ASP-E on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis VIPER50ASP-E (PDF), hind VIPER50ASP-E, Pinout VIPER50ASP-E, manuaal VIPER50ASP-E Ja VIPER50ASP-E asenduslahendus.
VIPER50ASP-E, mida pakub STMicroelectronics, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC VIPER50ASP-E on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis VIPER50ASP-E (PDF), hind VIPER50ASP-E, Pinout VIPER50ASP-E, manuaal VIPER50ASP-E Ja VIPER50ASP-E asenduslahendus.
VIPER50ASP-E FAQ
:
1. What is the maximum operating frequency of the VIPER50ASP-E?
The maximum operating frequency of the VIPER50ASP-E is typically 100 kHz.
2. What is the input voltage range for the VIPER50ASP-E?
The input voltage range for the VIPER50ASP-E is from 4.5V to 30V.
3. What is the maximum output current of the VIPER50ASP-E?
The maximum output current of the VIPER50ASP-E is 700 mA.
4. Can the VIPER50ASP-E be used in flyback converter applications?
Yes, the VIPER50ASP-E is suitable for use in flyback converter applications.
5. What are the typical standby power consumption characteristics of the VIPER50ASP-E?
The typical standby power consumption of the VIPER50ASP-E is less than 30 mW at 265 VAC.
6. Is the VIPER50ASP-E compatible with PFC (Power Factor Correction) circuits?
Yes, the VIPER50ASP-E is compatible with PFC circuits.
7. What are the overvoltage protection features of the VIPER50ASP-E?
The VIPER50ASP-E includes overvoltage protection with a threshold of approximately 22V.
8. Can the VIPER50ASP-E operate in continuous or discontinuous mode?
The VIPER50ASP-E can operate in both continuous and discontinuous modes.
9. What are the typical soft-start characteristics of the VIPER50ASP-E?
The VIPER50ASP-E features a soft-start time of approximately 5 ms.
10. Does the VIPER50ASP-E include built-in thermal shutdown protection?
Yes, the VIPER50ASP-E includes built-in thermal shutdown protection to prevent overheating.
I hope this information is helpful!
The maximum operating frequency of the VIPER50ASP-E is typically 100 kHz.
2. What is the input voltage range for the VIPER50ASP-E?
The input voltage range for the VIPER50ASP-E is from 4.5V to 30V.
3. What is the maximum output current of the VIPER50ASP-E?
The maximum output current of the VIPER50ASP-E is 700 mA.
4. Can the VIPER50ASP-E be used in flyback converter applications?
Yes, the VIPER50ASP-E is suitable for use in flyback converter applications.
5. What are the typical standby power consumption characteristics of the VIPER50ASP-E?
The typical standby power consumption of the VIPER50ASP-E is less than 30 mW at 265 VAC.
6. Is the VIPER50ASP-E compatible with PFC (Power Factor Correction) circuits?
Yes, the VIPER50ASP-E is compatible with PFC circuits.
7. What are the overvoltage protection features of the VIPER50ASP-E?
The VIPER50ASP-E includes overvoltage protection with a threshold of approximately 22V.
8. Can the VIPER50ASP-E operate in continuous or discontinuous mode?
The VIPER50ASP-E can operate in both continuous and discontinuous modes.
9. What are the typical soft-start characteristics of the VIPER50ASP-E?
The VIPER50ASP-E features a soft-start time of approximately 5 ms.
10. Does the VIPER50ASP-E include built-in thermal shutdown protection?
Yes, the VIPER50ASP-E includes built-in thermal shutdown protection to prevent overheating.
I hope this information is helpful!
VIPER50ASP-E Seotud märksõnad
:
VIPER50ASP-E Hind
VIPER50ASP-E Maalimine
VIPER50ASP-E Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "VIPE" seeria tooteid
