VIPER20ASP-E STMicroelectronics IC SWIT SMPS CM OTP POWERSO10
Integraallülitused (IC-d)
Tootja number:
VIPER20ASP-E
Tootja:
Tootekategooria:
Kirjeldus:
IC SWIT SMPS CM OTP POWERSO10
RoHs olek:
Pliivaba / RoHS-iga ühilduv Andmetabelid:
VIPER20ASP-E Andmetabelid(PDF)
Juhtimisfunktsioonid :
-
Osa olek :
Obsolete
Paigaldustüüp :
Surface Mount
Pakend/ümbris :
PowerSO-10 Exposed Bottom Pad
Pakendamine :
Tube
Pinge – käivitamine :
11V
Pinge – rike :
700V
Pinge – toide (Vcc/Vdd) :
8 V ~ 15 V
Sagedus – ümberlülitamine :
Up to 200kHz
seeria :
VIPER™
Sisemised lülitid :
Yes
Tarnija seadmepakett :
10-PowerSO
Töötemperatuur :
-
Töötsükkel :
-
Väljundi isoleerimine :
Isolated
Veakaitse :
Current Limiting, Over Temperature
Võimsus (vatti) :
20W
Topoloogia :
Flyback
Laos
12,656
Ühiku hind:
Võtke meiega ühendust Pakkumine
VIPER20ASP-E Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele VIPER20ASP-E konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc VIPER20ASP-E. Parima hinna saamiseks saidil VIPER20ASP-E võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
VIPER20ASP-E Iseärasused
VIPER20ASP-E is produced by STMicroelectronics, belongs to DC-DC muundurid PMIC - AC, eraldiseisvad lülitid.
VIPER20ASP-E Toote üksikasjad
:
VIPER20ASP-E – DC-DC muundurid PMIC - AC, eraldiseisvad lülitid disainitud puhvervõimendid ja toodetud STMicroelectronics.
VIPER20ASP-E, mida pakub STMicroelectronics, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC VIPER20ASP-E on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis VIPER20ASP-E (PDF), hind VIPER20ASP-E, Pinout VIPER20ASP-E, manuaal VIPER20ASP-E Ja VIPER20ASP-E asenduslahendus.
VIPER20ASP-E, mida pakub STMicroelectronics, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC VIPER20ASP-E on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis VIPER20ASP-E (PDF), hind VIPER20ASP-E, Pinout VIPER20ASP-E, manuaal VIPER20ASP-E Ja VIPER20ASP-E asenduslahendus.
VIPER20ASP-E FAQ
:
1. What is the maximum input voltage for the VIPER20ASP-E?
The maximum input voltage for the VIPER20ASP-E is 700V.
2. What is the typical switching frequency of the VIPER20ASP-E?
The typical switching frequency of the VIPER20ASP-E is 60 kHz.
3. Can the VIPER20ASP-E operate in a continuous or discontinuous mode?
The VIPER20ASP-E can operate in both continuous and discontinuous modes, depending on the load conditions.
4. What are the protection features of the VIPER20ASP-E?
The VIPER20ASP-E includes overvoltage, overload, and overtemperature protections to ensure safe operation.
5. What is the maximum output current of the VIPER20ASP-E?
The maximum output current of the VIPER20ASP-E is 0.7A.
6. Is the VIPER20ASP-E suitable for flyback converter applications?
Yes, the VIPER20ASP-E is specifically designed for flyback converter applications.
7. What is the operating temperature range of the VIPER20ASP-E?
The operating temperature range of the VIPER20ASP-E is -40°C to 150°C.
8. Does the VIPER20ASP-E require an external MOSFET?
Yes, the VIPER20ASP-E requires an external MOSFET for its operation.
9. What is the standby power consumption of the VIPER20ASP-E?
The standby power consumption of the VIPER20ASP-E is typically below 30mW.
10. Can the VIPER20ASP-E be used in offline or isolated DC-DC converter designs?
Yes, the VIPER20ASP-E is suitable for both offline and isolated DC-DC converter designs.
The maximum input voltage for the VIPER20ASP-E is 700V.
2. What is the typical switching frequency of the VIPER20ASP-E?
The typical switching frequency of the VIPER20ASP-E is 60 kHz.
3. Can the VIPER20ASP-E operate in a continuous or discontinuous mode?
The VIPER20ASP-E can operate in both continuous and discontinuous modes, depending on the load conditions.
4. What are the protection features of the VIPER20ASP-E?
The VIPER20ASP-E includes overvoltage, overload, and overtemperature protections to ensure safe operation.
5. What is the maximum output current of the VIPER20ASP-E?
The maximum output current of the VIPER20ASP-E is 0.7A.
6. Is the VIPER20ASP-E suitable for flyback converter applications?
Yes, the VIPER20ASP-E is specifically designed for flyback converter applications.
7. What is the operating temperature range of the VIPER20ASP-E?
The operating temperature range of the VIPER20ASP-E is -40°C to 150°C.
8. Does the VIPER20ASP-E require an external MOSFET?
Yes, the VIPER20ASP-E requires an external MOSFET for its operation.
9. What is the standby power consumption of the VIPER20ASP-E?
The standby power consumption of the VIPER20ASP-E is typically below 30mW.
10. Can the VIPER20ASP-E be used in offline or isolated DC-DC converter designs?
Yes, the VIPER20ASP-E is suitable for both offline and isolated DC-DC converter designs.
VIPER20ASP-E Seotud märksõnad
:
VIPER20ASP-E Hind
VIPER20ASP-E Maalimine
VIPER20ASP-E Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "VIPE" seeria tooteid
