VIPER12ADIP-E STMicroelectronics IC OFFLINE SWIT PWM SMPS CM 8DIP
Integraallülitused (IC-d)
Tootja number:
VIPER12ADIP-E
Tootja:
Tootekategooria:
Kirjeldus:
IC OFFLINE SWIT PWM SMPS CM 8DIP
RoHs olek:
Pliivaba / RoHS-iga ühilduv Andmetabelid:
VIPER12ADIP-E Andmetabelid(PDF)
Juhtimisfunktsioonid :
-
Osa olek :
Active
Paigaldustüüp :
Through Hole
Pakend/ümbris :
8-DIP (0.300", 7.62mm)
Pakendamine :
Tube
Pinge – käivitamine :
14.5V
Pinge – rike :
730V
Pinge – toide (Vcc/Vdd) :
9 V ~ 38 V
Sagedus – ümberlülitamine :
60kHz
seeria :
VIPER™
Sisemised lülitid :
Yes
Tarnija seadmepakett :
8-DIP
Töötemperatuur :
-40°C ~ 150°C (TC)
Töötsükkel :
-
Väljundi isoleerimine :
Non-Isolated
Veakaitse :
Current Limiting, Over Temperature, Over Voltage
Võimsus (vatti) :
13W
Topoloogia :
-
Laos
15,068
Ühiku hind:
Võtke meiega ühendust Pakkumine
VIPER12ADIP-E Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele VIPER12ADIP-E konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc VIPER12ADIP-E. Parima hinna saamiseks saidil VIPER12ADIP-E võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
VIPER12ADIP-E Iseärasused
VIPER12ADIP-E is produced by STMicroelectronics, belongs to DC-DC muundurid PMIC - AC, eraldiseisvad lülitid.
VIPER12ADIP-E Toote üksikasjad
:
VIPER12ADIP-E – DC-DC muundurid PMIC - AC, eraldiseisvad lülitid disainitud puhvervõimendid ja toodetud STMicroelectronics.
VIPER12ADIP-E, mida pakub STMicroelectronics, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC VIPER12ADIP-E on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis VIPER12ADIP-E (PDF), hind VIPER12ADIP-E, Pinout VIPER12ADIP-E, manuaal VIPER12ADIP-E Ja VIPER12ADIP-E asenduslahendus.
VIPER12ADIP-E, mida pakub STMicroelectronics, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC VIPER12ADIP-E on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis VIPER12ADIP-E (PDF), hind VIPER12ADIP-E, Pinout VIPER12ADIP-E, manuaal VIPER12ADIP-E Ja VIPER12ADIP-E asenduslahendus.
VIPER12ADIP-E FAQ
:
1. What is the maximum operating frequency of the VIPER12ADIP-E?
The maximum operating frequency of the VIPER12ADIP-E is typically 100 kHz.
2. What is the input voltage range for the VIPER12ADIP-E?
The input voltage range for the VIPER12ADIP-E is from 4.5V to 30V.
3. Can the VIPER12ADIP-E be used in flyback converter applications?
Yes, the VIPER12ADIP-E is suitable for use in flyback converter applications.
4. What is the maximum output current of the VIPER12ADIP-E?
The maximum output current of the VIPER12ADIP-E is typically 0.25A.
5. Is the VIPER12ADIP-E suitable for offline power supplies?
Yes, the VIPER12ADIP-E is designed for use in offline power supplies.
6. What are the typical standby power consumption levels for the VIPER12ADIP-E?
The typical standby power consumption for the VIPER12ADIP-E is less than 30mW at 265VAC.
7. Does the VIPER12ADIP-E include overvoltage protection?
Yes, the VIPER12ADIP-E features built-in overvoltage protection.
8. What type of package does the VIPER12ADIP-E come in?
The VIPER12ADIP-E is available in a DIP-8 package.
9. Can the VIPER12ADIP-E operate in continuous or discontinuous mode?
The VIPER12ADIP-E can operate in both continuous and discontinuous modes, depending on the application requirements.
10. What are the typical operating temperature ranges for the VIPER12ADIP-E?
The VIPER12ADIP-E is designed to operate within a temperature range of -40°C to 125°C.
The maximum operating frequency of the VIPER12ADIP-E is typically 100 kHz.
2. What is the input voltage range for the VIPER12ADIP-E?
The input voltage range for the VIPER12ADIP-E is from 4.5V to 30V.
3. Can the VIPER12ADIP-E be used in flyback converter applications?
Yes, the VIPER12ADIP-E is suitable for use in flyback converter applications.
4. What is the maximum output current of the VIPER12ADIP-E?
The maximum output current of the VIPER12ADIP-E is typically 0.25A.
5. Is the VIPER12ADIP-E suitable for offline power supplies?
Yes, the VIPER12ADIP-E is designed for use in offline power supplies.
6. What are the typical standby power consumption levels for the VIPER12ADIP-E?
The typical standby power consumption for the VIPER12ADIP-E is less than 30mW at 265VAC.
7. Does the VIPER12ADIP-E include overvoltage protection?
Yes, the VIPER12ADIP-E features built-in overvoltage protection.
8. What type of package does the VIPER12ADIP-E come in?
The VIPER12ADIP-E is available in a DIP-8 package.
9. Can the VIPER12ADIP-E operate in continuous or discontinuous mode?
The VIPER12ADIP-E can operate in both continuous and discontinuous modes, depending on the application requirements.
10. What are the typical operating temperature ranges for the VIPER12ADIP-E?
The VIPER12ADIP-E is designed to operate within a temperature range of -40°C to 125°C.
VIPER12ADIP-E Seotud märksõnad
:
VIPER12ADIP-E Hind
VIPER12ADIP-E Maalimine
VIPER12ADIP-E Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "VIPE" seeria tooteid
