STNRG288A STMicroelectronics DIGITAL CONTROLLER FOR POWER CON
Integraallülitused (IC-d)
Tootja number:
STNRG288A
Tootja:
Tootekategooria:
Kirjeldus:
DIGITAL CONTROLLER FOR POWER CON
RoHs olek:
Andmetabelid:
STNRG288A Andmetabelid(PDF)
Osa olek :
Active
Paigaldustüüp :
Surface Mount
Pakend/ümbris :
28-TSSOP (0.173", 4.40mm Width)
Pakendamine :
Tube
Pinge – toide :
3 V ~ 5.5 V
Praegune – pakkumine :
100mA
Rakendused :
PWM Generator
seeria :
-
Tarnija seadmepakett :
28-TSSOP
Töötemperatuur :
-40°C ~ 105°C
Laos
18,733
Ühiku hind:
Võtke meiega ühendust Pakkumine
STNRG288A Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele STNRG288A konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc STNRG288A. Parima hinna saamiseks saidil STNRG288A võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
STNRG288A Iseärasused
STNRG288A is produced by STMicroelectronics, belongs to PMIC – toitehaldus – spetsialiseerunud.
STNRG288A Toote üksikasjad
:
STNRG288A – PMIC – toitehaldus – spetsialiseerunud disainitud puhvervõimendid ja toodetud STMicroelectronics.
STNRG288A, mida pakub STMicroelectronics, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC STNRG288A on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis STNRG288A (PDF), hind STNRG288A, Pinout STNRG288A, manuaal STNRG288A Ja STNRG288A asenduslahendus.
STNRG288A, mida pakub STMicroelectronics, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC STNRG288A on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis STNRG288A (PDF), hind STNRG288A, Pinout STNRG288A, manuaal STNRG288A Ja STNRG288A asenduslahendus.
STNRG288A FAQ
:
1. What is the maximum operating frequency of the STNRG288A?
The maximum operating frequency of the STNRG288A is 64 MHz.
2. Can the STNRG288A operate with a wide input voltage range?
Yes, the STNRG288A can operate with an input voltage range from 4.5V to 60V.
3. What type of communication interfaces does the STNRG288A support?
The STNRG288A supports SPI (Serial Peripheral Interface) and UART (Universal Asynchronous Receiver-Transmitter) communication interfaces.
4. Is the STNRG288A suitable for power factor correction applications?
Yes, the STNRG288A is well-suited for power factor correction applications due to its advanced control algorithms and high-performance features.
5. What are the key protection features of the STNRG288A?
The STNRG288A includes overcurrent protection, overvoltage protection, and thermal shutdown features to ensure system safety and reliability.
6. Can the STNRG288A be used in automotive applications?
Yes, the STNRG288A is designed to meet automotive quality and reliability standards, making it suitable for automotive applications.
7. Does the STNRG288A have built-in analog-to-digital converters (ADCs)?
Yes, the STNRG288A integrates two 12-bit ADCs for accurate analog signal measurements.
8. What development tools are available for programming and debugging the STNRG288A?
ST provides a comprehensive set of development tools including evaluation boards, software development kits, and debugging tools for efficient programming and debugging of the STNRG288A.
9. Can the STNRG288A operate in harsh industrial environments?
Yes, the STNRG288A is designed to withstand harsh industrial environments with its robust construction and wide operating temperature range.
10. What are the key advantages of using the STNRG288A in power management applications?
The STNRG288A offers high efficiency, precise control, and comprehensive protection features, making it an ideal choice for demanding power management applications.
The maximum operating frequency of the STNRG288A is 64 MHz.
2. Can the STNRG288A operate with a wide input voltage range?
Yes, the STNRG288A can operate with an input voltage range from 4.5V to 60V.
3. What type of communication interfaces does the STNRG288A support?
The STNRG288A supports SPI (Serial Peripheral Interface) and UART (Universal Asynchronous Receiver-Transmitter) communication interfaces.
4. Is the STNRG288A suitable for power factor correction applications?
Yes, the STNRG288A is well-suited for power factor correction applications due to its advanced control algorithms and high-performance features.
5. What are the key protection features of the STNRG288A?
The STNRG288A includes overcurrent protection, overvoltage protection, and thermal shutdown features to ensure system safety and reliability.
6. Can the STNRG288A be used in automotive applications?
Yes, the STNRG288A is designed to meet automotive quality and reliability standards, making it suitable for automotive applications.
7. Does the STNRG288A have built-in analog-to-digital converters (ADCs)?
Yes, the STNRG288A integrates two 12-bit ADCs for accurate analog signal measurements.
8. What development tools are available for programming and debugging the STNRG288A?
ST provides a comprehensive set of development tools including evaluation boards, software development kits, and debugging tools for efficient programming and debugging of the STNRG288A.
9. Can the STNRG288A operate in harsh industrial environments?
Yes, the STNRG288A is designed to withstand harsh industrial environments with its robust construction and wide operating temperature range.
10. What are the key advantages of using the STNRG288A in power management applications?
The STNRG288A offers high efficiency, precise control, and comprehensive protection features, making it an ideal choice for demanding power management applications.
STNRG288A Seotud märksõnad
:
STNRG288A Hind
STNRG288A Maalimine
STNRG288A Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "STNR" seeria tooteid
