BR24G256-3A Rohm Semiconductor IC EEPROM 256KBIT 1MHZ 8DIP
Integraallülitused (IC-d)
Tootja number:
BR24G256-3A
Tootja:
Tootekategooria:
Kirjeldus:
IC EEPROM 256KBIT 1MHZ 8DIP
RoHs olek:
Pliivaba / RoHS-iga ühilduv Andmetabelid:
BR24G256-3A Andmetabelid(PDF)
Juurdepääsu aeg :
-
Kella sagedus :
1MHz
Mälu liides :
I²C
Mälu suurus :
256Kb (32K x 8)
Mälu tüüp :
Non-Volatile
Mälu vorming :
EEPROM
Osa olek :
Active
Paigaldustüüp :
Through Hole
Pakend/ümbris :
8-DIP (0.300", 7.62mm)
Pakendamine :
Tube
Pinge – toide :
1.7 V ~ 5.5 V
seeria :
-
Tarnija seadmepakett :
8-DIP-T
Tehnoloogia :
EEPROM
Töötemperatuur :
-40°C ~ 85°C (TA)
Tsükli aja kirjutamine – sõna, leht :
5ms
Laos
48,195
Ühiku hind:
Võtke meiega ühendust Pakkumine
BR24G256-3A Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele BR24G256-3A konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc BR24G256-3A. Parima hinna saamiseks saidil BR24G256-3A võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
BR24G256-3A Iseärasused
BR24G256-3A is produced by Rohm Semiconductor, belongs to Mälu.
BR24G256-3A Toote üksikasjad
:
BR24G256-3A – Mälu disainitud puhvervõimendid ja toodetud Rohm Semiconductor.
BR24G256-3A, mida pakub Rohm Semiconductor, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC BR24G256-3A on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis BR24G256-3A (PDF), hind BR24G256-3A, Pinout BR24G256-3A, manuaal BR24G256-3A Ja BR24G256-3A asenduslahendus.
BR24G256-3A, mida pakub Rohm Semiconductor, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC BR24G256-3A on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis BR24G256-3A (PDF), hind BR24G256-3A, Pinout BR24G256-3A, manuaal BR24G256-3A Ja BR24G256-3A asenduslahendus.
BR24G256-3A FAQ
:
1. What is the operating voltage range of the BR24G256-3A?
The operating voltage range of the BR24G256-3A is 1.7V to 5.5V.
2. What is the maximum clock frequency supported by the BR24G256-3A?
The BR24G256-3A supports a maximum clock frequency of 1MHz.
3. Can the BR24G256-3A operate in harsh environmental conditions?
Yes, the BR24G256-3A is designed to operate in a wide temperature range from -40°C to 85°C and can withstand harsh environmental conditions.
4. What are the typical applications for the BR24G256-3A?
The BR24G256-3A is commonly used in applications such as industrial equipment, automotive systems, and consumer electronics.
5. Does the BR24G256-3A support sequential read operation?
Yes, the BR24G256-3A supports sequential read operation for efficient data retrieval.
6. What is the standby current consumption of the BR24G256-3A?
The standby current consumption of the BR24G256-3A is typically 1μA.
7. Is the BR24G256-3A compatible with I2C bus protocol?
Yes, the BR24G256-3A is fully compatible with the I2C bus protocol.
8. What is the write cycle endurance of the BR24G256-3A?
The BR24G256-3A has a write cycle endurance of 1 million cycles per byte.
9. Can the BR24G256-3A support software write protection?
Yes, the BR24G256-3A features software write protection to prevent unauthorized write access.
10. What package options are available for the BR24G256-3A?
The BR24G256-3A is available in SOP8 and TSSOP-B8 package options to accommodate different design requirements.
The operating voltage range of the BR24G256-3A is 1.7V to 5.5V.
2. What is the maximum clock frequency supported by the BR24G256-3A?
The BR24G256-3A supports a maximum clock frequency of 1MHz.
3. Can the BR24G256-3A operate in harsh environmental conditions?
Yes, the BR24G256-3A is designed to operate in a wide temperature range from -40°C to 85°C and can withstand harsh environmental conditions.
4. What are the typical applications for the BR24G256-3A?
The BR24G256-3A is commonly used in applications such as industrial equipment, automotive systems, and consumer electronics.
5. Does the BR24G256-3A support sequential read operation?
Yes, the BR24G256-3A supports sequential read operation for efficient data retrieval.
6. What is the standby current consumption of the BR24G256-3A?
The standby current consumption of the BR24G256-3A is typically 1μA.
7. Is the BR24G256-3A compatible with I2C bus protocol?
Yes, the BR24G256-3A is fully compatible with the I2C bus protocol.
8. What is the write cycle endurance of the BR24G256-3A?
The BR24G256-3A has a write cycle endurance of 1 million cycles per byte.
9. Can the BR24G256-3A support software write protection?
Yes, the BR24G256-3A features software write protection to prevent unauthorized write access.
10. What package options are available for the BR24G256-3A?
The BR24G256-3A is available in SOP8 and TSSOP-B8 package options to accommodate different design requirements.
BR24G256-3A Seotud märksõnad
:
BR24G256-3A Hind
BR24G256-3A Maalimine
BR24G256-3A Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "BR24" seeria tooteid
