TNY286DG Power Integrations IC OFF-LINE SWITCH PWM 8SO
Integraallülitused (IC-d)
Tootja number:
TNY286DG
Tootja:
Tootekategooria:
Kirjeldus:
IC OFF-LINE SWITCH PWM 8SO
RoHs olek:
Pliivaba / RoHS-iga ühilduv Andmetabelid:
TNY286DG Andmetabelid(PDF)
Juhtimisfunktsioonid :
EN
Osa olek :
Active
Paigaldustüüp :
Surface Mount
Pakend/ümbris :
8-SOIC (0.154", 3.90mm Width), 7 Leads
Pakendamine :
Tube
Pinge – käivitamine :
-
Pinge – rike :
725V
Pinge – toide (Vcc/Vdd) :
-
Sagedus – ümberlülitamine :
124kHz ~ 140kHz
seeria :
TinySwitch®-4
Sisemised lülitid :
Yes
Tarnija seadmepakett :
8-SO
Töötemperatuur :
-40°C ~ 150°C (TJ)
Töötsükkel :
67%
Väljundi isoleerimine :
Isolated
Veakaitse :
Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit
Võimsus (vatti) :
13W
Topoloogia :
Flyback
Laos
48,732
Ühiku hind:
Võtke meiega ühendust Pakkumine
TNY286DG Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele TNY286DG konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc TNY286DG. Parima hinna saamiseks saidil TNY286DG võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
TNY286DG Iseärasused
TNY286DG is produced by Power Integrations, belongs to DC-DC muundurid PMIC - AC, eraldiseisvad lülitid.
TNY286DG Toote üksikasjad
:
TNY286DG – DC-DC muundurid PMIC - AC, eraldiseisvad lülitid disainitud puhvervõimendid ja toodetud Power Integrations.
TNY286DG, mida pakub Power Integrations, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC TNY286DG on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis TNY286DG (PDF), hind TNY286DG, Pinout TNY286DG, manuaal TNY286DG Ja TNY286DG asenduslahendus.
TNY286DG, mida pakub Power Integrations, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC TNY286DG on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis TNY286DG (PDF), hind TNY286DG, Pinout TNY286DG, manuaal TNY286DG Ja TNY286DG asenduslahendus.
TNY286DG FAQ
:
1. What is the maximum operating frequency of the TNY286DG?
The maximum operating frequency of the TNY286DG is typically 132 kHz.
2. What is the maximum output power this device can handle?
The TNY286DG can handle a maximum output power of 15 W.
3. Can you explain the typical application circuit for the TNY286DG?
The typical application circuit for the TNY286DG includes the use of an external resistor to set the operating frequency and an output diode and capacitor for energy storage.
4. What are the primary features of the TNY286DG?
The primary features of the TNY286DG include integrated 700 V MOSFET, frequency jittering for low EMI, and auto-restart for short-circuit protection.
5. How does the TNY286DG achieve high efficiency?
The TNY286DG achieves high efficiency through its primary-side regulation, which eliminates the need for an optocoupler and improves overall system reliability.
6. What are the key safety features of the TNY286DG?
The TNY286DG includes features such as line undervoltage lockout, hysteretic thermal shutdown, and output overvoltage protection for enhanced safety.
7. Can the TNY286DG operate in a wide input voltage range?
Yes, the TNY286DG can operate in a wide input voltage range from 85 VAC to 265 VAC.
8. Is the TNY286DG suitable for offline flyback power supply applications?
Yes, the TNY286DG is specifically designed for offline flyback power supply applications.
9. What is the typical standby power consumption of the TNY286DG?
The typical standby power consumption of the TNY286DG is less than 30 mW at 230 VAC input.
10. Does the TNY286DG require an external heat sink for thermal management?
No, the TNY286DG is designed to operate without the need for an external heat sink under normal operating conditions.
I hope these answers are helpful!
The maximum operating frequency of the TNY286DG is typically 132 kHz.
2. What is the maximum output power this device can handle?
The TNY286DG can handle a maximum output power of 15 W.
3. Can you explain the typical application circuit for the TNY286DG?
The typical application circuit for the TNY286DG includes the use of an external resistor to set the operating frequency and an output diode and capacitor for energy storage.
4. What are the primary features of the TNY286DG?
The primary features of the TNY286DG include integrated 700 V MOSFET, frequency jittering for low EMI, and auto-restart for short-circuit protection.
5. How does the TNY286DG achieve high efficiency?
The TNY286DG achieves high efficiency through its primary-side regulation, which eliminates the need for an optocoupler and improves overall system reliability.
6. What are the key safety features of the TNY286DG?
The TNY286DG includes features such as line undervoltage lockout, hysteretic thermal shutdown, and output overvoltage protection for enhanced safety.
7. Can the TNY286DG operate in a wide input voltage range?
Yes, the TNY286DG can operate in a wide input voltage range from 85 VAC to 265 VAC.
8. Is the TNY286DG suitable for offline flyback power supply applications?
Yes, the TNY286DG is specifically designed for offline flyback power supply applications.
9. What is the typical standby power consumption of the TNY286DG?
The typical standby power consumption of the TNY286DG is less than 30 mW at 230 VAC input.
10. Does the TNY286DG require an external heat sink for thermal management?
No, the TNY286DG is designed to operate without the need for an external heat sink under normal operating conditions.
I hope these answers are helpful!
TNY286DG Seotud märksõnad
:
TNY286DG Hind
TNY286DG Maalimine
TNY286DG Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "TNY2" seeria tooteid
