TNY256G Power Integrations IC OFFLINE SWIT OTP UVLO HV 8SMD
Integraallülitused (IC-d)
Tootja number:
TNY256G
Tootja:
Tootekategooria:
Kirjeldus:
IC OFFLINE SWIT OTP UVLO HV 8SMD
RoHs olek:
Andmetabelid:
TNY256G Andmetabelid(PDF)
Juhtimisfunktsioonid :
EN
Osa olek :
Obsolete
Paigaldustüüp :
Surface Mount
Pakend/ümbris :
8-SMD, Gull Wing
Pakendamine :
Tube
Pinge – käivitamine :
-
Pinge – rike :
700V
Pinge – toide (Vcc/Vdd) :
-
Sagedus – ümberlülitamine :
130kHz
seeria :
TinySwitch® Plus
Sisemised lülitid :
Yes
Tarnija seadmepakett :
8-SMD
Töötemperatuur :
-40°C ~ 150°C (TJ)
Töötsükkel :
66%
Väljundi isoleerimine :
Isolated
Veakaitse :
Current Limiting, Over Temperature
Võimsus (vatti) :
10W
Topoloogia :
Flyback
Laos
26,552
Ühiku hind:
Võtke meiega ühendust Pakkumine
TNY256G Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele TNY256G konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc TNY256G. Parima hinna saamiseks saidil TNY256G võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
TNY256G Iseärasused
TNY256G is produced by Power Integrations, belongs to DC-DC muundurid PMIC - AC, eraldiseisvad lülitid.
TNY256G Toote üksikasjad
:
TNY256G – DC-DC muundurid PMIC - AC, eraldiseisvad lülitid disainitud puhvervõimendid ja toodetud Power Integrations.
TNY256G, mida pakub Power Integrations, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC TNY256G on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis TNY256G (PDF), hind TNY256G, Pinout TNY256G, manuaal TNY256G Ja TNY256G asenduslahendus.
TNY256G, mida pakub Power Integrations, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC TNY256G on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis TNY256G (PDF), hind TNY256G, Pinout TNY256G, manuaal TNY256G Ja TNY256G asenduslahendus.
TNY256G FAQ
:
1. What is the maximum operating frequency of the TNY256G?
The maximum operating frequency of the TNY256G is typically 132 kHz.
2. What is the maximum output power this device can handle?
The TNY256G can handle a maximum output power of 15 W.
3. Can you explain the typical application circuit for the TNY256G?
The typical application circuit for the TNY256G includes the primary side switch, output diode, output capacitor, and control circuitry for regulation and protection.
4. What are the key features of the TNY256G?
Key features of the TNY256G include integrated 725 V MOSFET, frequency jittering for low EMI, and auto-restart for short-circuit protection.
5. How does the TNY256G achieve high efficiency?
The TNY256G achieves high efficiency through primary-side regulation, minimizing standby power consumption, and optimizing switching frequency based on load.
6. What are the recommended input and output capacitors for the TNY256G?
The recommended input capacitor for the TNY256G is a 10 µF aluminum electrolytic or 4.7 µF ceramic capacitor, while the recommended output capacitor is a 47 µF aluminum electrolytic or 22 µF ceramic capacitor.
7. Can the TNY256G operate in continuous conduction mode (CCM)?
Yes, the TNY256G can operate in continuous conduction mode to provide smooth regulation and low output ripple.
8. What is the typical start-up time for the TNY256G?
The typical start-up time for the TNY256G is around 500 ms.
9. How does the TNY256G handle overvoltage and overcurrent protection?
The TNY256G incorporates overvoltage and overcurrent protection by utilizing feedback control and an internal sense FET.
10. Is the TNY256G suitable for universal input voltage applications?
Yes, the TNY256G is designed to be suitable for universal input voltage applications, typically ranging from 85 VAC to 265 VAC.
The maximum operating frequency of the TNY256G is typically 132 kHz.
2. What is the maximum output power this device can handle?
The TNY256G can handle a maximum output power of 15 W.
3. Can you explain the typical application circuit for the TNY256G?
The typical application circuit for the TNY256G includes the primary side switch, output diode, output capacitor, and control circuitry for regulation and protection.
4. What are the key features of the TNY256G?
Key features of the TNY256G include integrated 725 V MOSFET, frequency jittering for low EMI, and auto-restart for short-circuit protection.
5. How does the TNY256G achieve high efficiency?
The TNY256G achieves high efficiency through primary-side regulation, minimizing standby power consumption, and optimizing switching frequency based on load.
6. What are the recommended input and output capacitors for the TNY256G?
The recommended input capacitor for the TNY256G is a 10 µF aluminum electrolytic or 4.7 µF ceramic capacitor, while the recommended output capacitor is a 47 µF aluminum electrolytic or 22 µF ceramic capacitor.
7. Can the TNY256G operate in continuous conduction mode (CCM)?
Yes, the TNY256G can operate in continuous conduction mode to provide smooth regulation and low output ripple.
8. What is the typical start-up time for the TNY256G?
The typical start-up time for the TNY256G is around 500 ms.
9. How does the TNY256G handle overvoltage and overcurrent protection?
The TNY256G incorporates overvoltage and overcurrent protection by utilizing feedback control and an internal sense FET.
10. Is the TNY256G suitable for universal input voltage applications?
Yes, the TNY256G is designed to be suitable for universal input voltage applications, typically ranging from 85 VAC to 265 VAC.
TNY256G Seotud märksõnad
:
TNY256G Hind
TNY256G Maalimine
TNY256G Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "TNY2" seeria tooteid
