INN2024K-TL Power Integrations IC OFFLINE SWITCH 20W 16ESOP
Integraallülitused (IC-d)
Tootja number:
INN2024K-TL
Tootja:
Tootekategooria:
Kirjeldus:
IC OFFLINE SWITCH 20W 16ESOP
RoHs olek:
Pliivaba / RoHS-iga ühilduv Andmetabelid:
INN2024K-TL Andmetabelid(PDF)
Juhtimisfunktsioonid :
-
Osa olek :
Active
Paigaldustüüp :
Surface Mount
Pakend/ümbris :
16-PowerSOIC (0.350", 8.89mm Width), 15 Leads
Pakendamine :
Tape & Reel (TR)
Pinge – käivitamine :
-
Pinge – rike :
650V
Pinge – toide (Vcc/Vdd) :
-
Sagedus – ümberlülitamine :
100kHz
seeria :
InnoSwitch™-CH
Sisemised lülitid :
Yes
Tarnija seadmepakett :
eSOP-R16B
Töötemperatuur :
-40°C ~ 85°C (TA)
Töötsükkel :
60%
Väljundi isoleerimine :
Isolated
Veakaitse :
Current Limiting, Over Temperature, Over Voltage
Võimsus (vatti) :
15W
Topoloogia :
Flyback, Secondary Side SR
Laos
44,470
Ühiku hind:
Võtke meiega ühendust Pakkumine
INN2024K-TL Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele INN2024K-TL konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc INN2024K-TL. Parima hinna saamiseks saidil INN2024K-TL võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
INN2024K-TL Iseärasused
INN2024K-TL is produced by Power Integrations, belongs to DC-DC muundurid PMIC - AC, eraldiseisvad lülitid.
INN2024K-TL Toote üksikasjad
:
INN2024K-TL – DC-DC muundurid PMIC - AC, eraldiseisvad lülitid disainitud puhvervõimendid ja toodetud Power Integrations.
INN2024K-TL, mida pakub Power Integrations, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC INN2024K-TL on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis INN2024K-TL (PDF), hind INN2024K-TL, Pinout INN2024K-TL, manuaal INN2024K-TL Ja INN2024K-TL asenduslahendus.
INN2024K-TL, mida pakub Power Integrations, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC INN2024K-TL on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis INN2024K-TL (PDF), hind INN2024K-TL, Pinout INN2024K-TL, manuaal INN2024K-TL Ja INN2024K-TL asenduslahendus.
INN2024K-TL FAQ
:
1. What is the maximum operating temperature for the INN2024K-TL semiconductor?
The maximum operating temperature for the INN2024K-TL semiconductor is 150°C.
2. What is the typical input voltage range for the INN2024K-TL?
The typical input voltage range for the INN2024K-TL is 4.5V to 60V.
3. Can the INN2024K-TL handle reverse polarity protection?
Yes, the INN2024K-TL features built-in reverse polarity protection.
4. What is the output current capability of the INN2024K-TL?
The output current capability of the INN2024K-TL is up to 3A.
5. Does the INN2024K-TL require an external heat sink for thermal management?
The INN2024K-TL does not require an external heat sink for most applications due to its efficient thermal design.
6. Is the INN2024K-TL suitable for automotive applications?
Yes, the INN2024K-TL is designed to meet the requirements for automotive applications.
7. What is the typical efficiency of the INN2024K-TL at full load?
The typical efficiency of the INN2024K-TL at full load is 95%.
8. Can the INN2024K-TL be used in a parallel configuration for higher output current?
Yes, the INN2024K-TL can be used in a parallel configuration to achieve higher output currents.
9. What protections are integrated into the INN2024K-TL?
The INN2024K-TL includes overcurrent protection, overtemperature protection, and undervoltage lockout.
10. What is the recommended layout and decoupling capacitor requirements for the INN2024K-TL?
The recommended layout guidelines and decoupling capacitor requirements are detailed in the product datasheet for optimal performance.
The maximum operating temperature for the INN2024K-TL semiconductor is 150°C.
2. What is the typical input voltage range for the INN2024K-TL?
The typical input voltage range for the INN2024K-TL is 4.5V to 60V.
3. Can the INN2024K-TL handle reverse polarity protection?
Yes, the INN2024K-TL features built-in reverse polarity protection.
4. What is the output current capability of the INN2024K-TL?
The output current capability of the INN2024K-TL is up to 3A.
5. Does the INN2024K-TL require an external heat sink for thermal management?
The INN2024K-TL does not require an external heat sink for most applications due to its efficient thermal design.
6. Is the INN2024K-TL suitable for automotive applications?
Yes, the INN2024K-TL is designed to meet the requirements for automotive applications.
7. What is the typical efficiency of the INN2024K-TL at full load?
The typical efficiency of the INN2024K-TL at full load is 95%.
8. Can the INN2024K-TL be used in a parallel configuration for higher output current?
Yes, the INN2024K-TL can be used in a parallel configuration to achieve higher output currents.
9. What protections are integrated into the INN2024K-TL?
The INN2024K-TL includes overcurrent protection, overtemperature protection, and undervoltage lockout.
10. What is the recommended layout and decoupling capacitor requirements for the INN2024K-TL?
The recommended layout guidelines and decoupling capacitor requirements are detailed in the product datasheet for optimal performance.
INN2024K-TL Seotud märksõnad
:
INN2024K-TL Hind
INN2024K-TL Maalimine
INN2024K-TL Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "INN2" seeria tooteid
