DM74S374N ON Semiconductor IC FF D-TYPE SNGL 8BIT 20DIP
Integraallülitused (IC-d)
Tootja number:
DM74S374N
Tootja:
Tootekategooria:
Kirjeldus:
IC FF D-TYPE SNGL 8BIT 20DIP
RoHs olek:
Pliivaba / RoHS-iga ühilduv Andmetabelid:
DM74S374N Andmetabelid(PDF)
Elementide arv :
1
Funktsioon :
Standard
Kella sagedus :
75MHz
Maksimaalne levimisviivitus @ V, Max CL :
-
Osa olek :
Obsolete
Päästiku tüüp :
Positive Edge
Paigaldustüüp :
Through Hole
Pakend/ümbris :
20-DIP (0.300", 7.62mm)
Pakendamine :
Tube
Pinge – toide :
4.75 V ~ 5.25 V
Praegune – vaikne (Iq) :
110mA
seeria :
74S
Sisendvõimsus :
-
Töötemperatuur :
0°C ~ 70°C (TA)
Tüüp :
D-Type
Väljundi tüüp :
Non-Inverted
Vool – väljund kõrge, madal :
6.5mA, 20mA
Bittide arv elemendi kohta :
8
Laos
20,750
Ühiku hind:
Võtke meiega ühendust Pakkumine
DM74S374N Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele DM74S374N konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc DM74S374N. Parima hinna saamiseks saidil DM74S374N võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
DM74S374N Iseärasused
DM74S374N is produced by ON Semiconductor, belongs to Loogika – Flip Flops.
DM74S374N Toote üksikasjad
:
DM74S374N – Loogika – Flip Flops disainitud puhvervõimendid ja toodetud ON Semiconductor.
DM74S374N, mida pakub ON Semiconductor, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC DM74S374N on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis DM74S374N (PDF), hind DM74S374N, Pinout DM74S374N, manuaal DM74S374N Ja DM74S374N asenduslahendus.
DM74S374N, mida pakub ON Semiconductor, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC DM74S374N on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis DM74S374N (PDF), hind DM74S374N, Pinout DM74S374N, manuaal DM74S374N Ja DM74S374N asenduslahendus.
DM74S374N FAQ
:
1. What is the function of the DM74S374N semiconductor?
The DM74S374N is a semiconductor device that serves as an octal D-type transparent latch with 3-state outputs. It is commonly used for storage and transfer of data in digital systems.
2. What are the key features of the DM74S374N semiconductor?
The DM74S374N features 3-state outputs, high-speed operation, and compatibility with various logic systems. It also offers a wide operating voltage range and low power consumption.
3. What is the maximum operating frequency of the DM74S374N semiconductor?
The DM74S374N semiconductor can operate at a maximum clock frequency of [insert frequency] MHz, making it suitable for high-speed applications.
4. How is the DM74S374N semiconductor typically used in electronic circuits?
The DM74S374N is commonly used to store and control data in microprocessor-based systems, address decoding, and bus interfacing applications. Its 3-state outputs allow for efficient control of bus lines.
5. What are the voltage and current specifications for the DM74S374N semiconductor?
The DM74S374N operates within a voltage range of [insert voltage range] and has a maximum output current of [insert current] mA, ensuring reliable performance in various circuit configurations.
6. Can the DM74S374N semiconductor withstand ESD (electrostatic discharge) events?
Yes, the DM74S374N is designed to withstand ESD events up to [insert ESD rating] volts, providing protection against electrostatic damage during handling and operation.
7. What are the recommended operating temperature and storage conditions for the DM74S374N semiconductor?
The DM74S374N is designed to operate within a temperature range of [insert temperature range] and should be stored in a dry, non-condensing environment at temperatures between [insert storage temperature range].
8. Does the DM74S374N semiconductor require any external components for proper operation?
The DM74S374N may require external pull-up or pull-down resistors, depending on the specific application and system requirements. Careful consideration of input and output loading is essential for optimal performance.
9. Are there any known reliability issues or failure modes associated with the DM74S374N semiconductor?
The DM74S374N is known for its robustness and reliability when operated within specified parameters. However, excessive voltage or current stress, improper handling, or environmental factors can impact its performance.
10. What are the recommended design guidelines for incorporating the DM74S374N semiconductor into a circuit?
When designing with the DM74S374N, attention should be given to signal integrity, power supply decoupling, and thermal management. Proper PCB layout and grounding techniques are crucial for achieving reliable operation.
I hope this meets your requirements! Let me know if you need any further assistance.
The DM74S374N is a semiconductor device that serves as an octal D-type transparent latch with 3-state outputs. It is commonly used for storage and transfer of data in digital systems.
2. What are the key features of the DM74S374N semiconductor?
The DM74S374N features 3-state outputs, high-speed operation, and compatibility with various logic systems. It also offers a wide operating voltage range and low power consumption.
3. What is the maximum operating frequency of the DM74S374N semiconductor?
The DM74S374N semiconductor can operate at a maximum clock frequency of [insert frequency] MHz, making it suitable for high-speed applications.
4. How is the DM74S374N semiconductor typically used in electronic circuits?
The DM74S374N is commonly used to store and control data in microprocessor-based systems, address decoding, and bus interfacing applications. Its 3-state outputs allow for efficient control of bus lines.
5. What are the voltage and current specifications for the DM74S374N semiconductor?
The DM74S374N operates within a voltage range of [insert voltage range] and has a maximum output current of [insert current] mA, ensuring reliable performance in various circuit configurations.
6. Can the DM74S374N semiconductor withstand ESD (electrostatic discharge) events?
Yes, the DM74S374N is designed to withstand ESD events up to [insert ESD rating] volts, providing protection against electrostatic damage during handling and operation.
7. What are the recommended operating temperature and storage conditions for the DM74S374N semiconductor?
The DM74S374N is designed to operate within a temperature range of [insert temperature range] and should be stored in a dry, non-condensing environment at temperatures between [insert storage temperature range].
8. Does the DM74S374N semiconductor require any external components for proper operation?
The DM74S374N may require external pull-up or pull-down resistors, depending on the specific application and system requirements. Careful consideration of input and output loading is essential for optimal performance.
9. Are there any known reliability issues or failure modes associated with the DM74S374N semiconductor?
The DM74S374N is known for its robustness and reliability when operated within specified parameters. However, excessive voltage or current stress, improper handling, or environmental factors can impact its performance.
10. What are the recommended design guidelines for incorporating the DM74S374N semiconductor into a circuit?
When designing with the DM74S374N, attention should be given to signal integrity, power supply decoupling, and thermal management. Proper PCB layout and grounding techniques are crucial for achieving reliable operation.
I hope this meets your requirements! Let me know if you need any further assistance.
DM74S374N Seotud märksõnad
:
DM74S374N Hind
DM74S374N Maalimine
DM74S374N Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "DM74" seeria tooteid
