DM74LS153N ON Semiconductor IC SELECTOR/MULTIPLEX 4-1 16-DIP
Integraallülitused (IC-d)
Tootja number:
DM74LS153N
Tootja:
Tootekategooria:
Kirjeldus:
IC SELECTOR/MULTIPLEX 4-1 16-DIP
RoHs olek:

Andmetabelid:
Ahel :
2 x 4:1
Osa olek :
Obsolete
Paigaldustüüp :
Through Hole
Pakend/ümbris :
16-DIP (0.300", 7.62mm)
Pakendamine :
Tube
Pinge – toide :
4.75 V ~ 5.25 V
seeria :
74LS
Sõltumatud vooluringid :
1
Tarnija seadmepakett :
16-DIP
Töötemperatuur :
0°C ~ 70°C
Tüüp :
Multiplexer
Vool – väljund kõrge, madal :
400µA, 8mA
Pinge toiteallikas :
Single Supply
Laos
51,554
Ühiku hind:
Võtke meiega ühendust Pakkumine
DM74LS153N Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele DM74LS153N konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc DM74LS153N. Parima hinna saamiseks saidil DM74LS153N võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
DM74LS153N Iseärasused
DM74LS153N is produced by ON Semiconductor, belongs to Loogika – signaali lülitid, multiplekserid, dekoodrid.
DM74LS153N Toote üksikasjad
:
DM74LS153N – Loogika – signaali lülitid, multiplekserid, dekoodrid disainitud puhvervõimendid ja toodetud ON Semiconductor.
DM74LS153N, mida pakub ON Semiconductor, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC DM74LS153N on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis DM74LS153N (PDF), hind DM74LS153N, Pinout DM74LS153N, manuaal DM74LS153N Ja DM74LS153N asenduslahendus.
DM74LS153N, mida pakub ON Semiconductor, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC DM74LS153N on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis DM74LS153N (PDF), hind DM74LS153N, Pinout DM74LS153N, manuaal DM74LS153N Ja DM74LS153N asenduslahendus.
DM74LS153N FAQ
:
1. What is the function of the DM74LS153N dual 4-line to 1-line data selector/multiplexer?
The DM74LS153N is designed to select one of four sources of data and route it to a single output, based on the binary value of the two control inputs. This allows for efficient data selection and multiplexing in digital circuits.
2. What are the typical operating voltage and current requirements for the DM74LS153N?
The DM74LS153N typically operates at a voltage range of 4.75V to 5.25V and has a maximum input current of 0.4mA. It is important to adhere to these specifications for proper functionality.
3. Can the DM74LS153N handle high-speed data selection and multiplexing?
Yes, the DM74LS153N is capable of handling high-speed data selection and multiplexing, making it suitable for applications requiring rapid switching and routing of digital signals.
4. What are the key features that differentiate the DM74LS153N from other similar components?
The DM74LS153N stands out due to its dual 4-line to 1-line configuration, which allows for versatile data selection and multiplexing capabilities. Additionally, its compatibility with TTL logic levels makes it widely applicable in digital systems.
5. How does the DM74LS153N handle input signal integrity and noise immunity?
The DM74LS153N incorporates internal circuitry to ensure robust noise immunity and reliable signal integrity, minimizing the impact of external disturbances on its operation.
6. What are the temperature range and storage conditions recommended for the DM74LS153N?
The DM74LS153N is designed to operate within a temperature range of -55°C to 125°C, and it should be stored in a dry, non-corrosive environment to maintain its performance and longevity.
7. Can the DM74LS153N be cascaded or used in combination with other similar components?
Yes, the DM74LS153N can be cascaded or combined with other similar components to expand the data selection and multiplexing capabilities as needed for specific system requirements.
8. Are there any known reliability issues or failure modes associated with the DM74LS153N?
The DM74LS153N is known for its reliability and robustness when operated within its specified parameters. However, exceeding the maximum ratings or improper handling may lead to potential failure modes.
9. What are the recommended PCB layout and routing guidelines for integrating the DM74LS153N into a circuit design?
When integrating the DM74LS153N into a PCB layout, it is advisable to follow standard best practices for signal integrity, power distribution, and thermal management to optimize its performance and reliability.
10. Can the DM74LS153N be used in automotive or industrial applications with extended temperature and environmental demands?
Yes, the DM74LS153N is suitable for automotive and industrial applications that require extended temperature ranges and resilience to harsh environmental conditions, making it a versatile choice for diverse engineering needs.
The DM74LS153N is designed to select one of four sources of data and route it to a single output, based on the binary value of the two control inputs. This allows for efficient data selection and multiplexing in digital circuits.
2. What are the typical operating voltage and current requirements for the DM74LS153N?
The DM74LS153N typically operates at a voltage range of 4.75V to 5.25V and has a maximum input current of 0.4mA. It is important to adhere to these specifications for proper functionality.
3. Can the DM74LS153N handle high-speed data selection and multiplexing?
Yes, the DM74LS153N is capable of handling high-speed data selection and multiplexing, making it suitable for applications requiring rapid switching and routing of digital signals.
4. What are the key features that differentiate the DM74LS153N from other similar components?
The DM74LS153N stands out due to its dual 4-line to 1-line configuration, which allows for versatile data selection and multiplexing capabilities. Additionally, its compatibility with TTL logic levels makes it widely applicable in digital systems.
5. How does the DM74LS153N handle input signal integrity and noise immunity?
The DM74LS153N incorporates internal circuitry to ensure robust noise immunity and reliable signal integrity, minimizing the impact of external disturbances on its operation.
6. What are the temperature range and storage conditions recommended for the DM74LS153N?
The DM74LS153N is designed to operate within a temperature range of -55°C to 125°C, and it should be stored in a dry, non-corrosive environment to maintain its performance and longevity.
7. Can the DM74LS153N be cascaded or used in combination with other similar components?
Yes, the DM74LS153N can be cascaded or combined with other similar components to expand the data selection and multiplexing capabilities as needed for specific system requirements.
8. Are there any known reliability issues or failure modes associated with the DM74LS153N?
The DM74LS153N is known for its reliability and robustness when operated within its specified parameters. However, exceeding the maximum ratings or improper handling may lead to potential failure modes.
9. What are the recommended PCB layout and routing guidelines for integrating the DM74LS153N into a circuit design?
When integrating the DM74LS153N into a PCB layout, it is advisable to follow standard best practices for signal integrity, power distribution, and thermal management to optimize its performance and reliability.
10. Can the DM74LS153N be used in automotive or industrial applications with extended temperature and environmental demands?
Yes, the DM74LS153N is suitable for automotive and industrial applications that require extended temperature ranges and resilience to harsh environmental conditions, making it a versatile choice for diverse engineering needs.
DM74LS153N Seotud märksõnad
:
DM74LS153N Hind
DM74LS153N Maalimine
DM74LS153N Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "DM74" seeria tooteid