74HC4520DB,112 Nexperia USA Inc. IC DUAL 4BIT SYNC BINAR 16-SSOP
Integraallülitused (IC-d)
Tootja number:
74HC4520DB,112
Tootja:
Tootekategooria:
Kirjeldus:
IC DUAL 4BIT SYNC BINAR 16-SSOP
RoHs olek:
Pliivaba / RoHS-iga ühilduv Andmetabelid:
74HC4520DB,112 Andmetabelid(PDF)
Ajastus :
Synchronous
Elementide arv :
2
Lähtesta :
Asynchronous
Loendamismäär :
69MHz
Loogika tüüp :
Binary Counter
Osa olek :
Obsolete
Päästiku tüüp :
Positive, Negative
Paigaldustüüp :
Surface Mount
Pakend/ümbris :
16-SSOP (0.209", 5.30mm Width)
Pakendamine :
Tube
Pinge – toide :
2V ~ 6V
seeria :
74HC
Suund :
UP
Tarnija seadmepakett :
16-SSOP
Töötemperatuur :
-40°C ~ 125°C
Bittide arv elemendi kohta :
4
Laos
24,873
Ühiku hind:
Võtke meiega ühendust Pakkumine
74HC4520DB,112 Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele 74HC4520DB,112 konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc 74HC4520DB,112. Parima hinna saamiseks saidil 74HC4520DB,112 võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
74HC4520DB,112 Iseärasused
74HC4520DB,112 is produced by Nexperia USA Inc., belongs to Loogika - loendurid, jagajad.
74HC4520DB,112 Toote üksikasjad
:
74HC4520DB,112 – Loogika - loendurid, jagajad disainitud puhvervõimendid ja toodetud Nexperia USA Inc..
74HC4520DB,112, mida pakub Nexperia USA Inc., saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC 74HC4520DB,112 on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis 74HC4520DB,112 (PDF), hind 74HC4520DB,112, Pinout 74HC4520DB,112, manuaal 74HC4520DB,112 Ja 74HC4520DB,112 asenduslahendus.
74HC4520DB,112, mida pakub Nexperia USA Inc., saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC 74HC4520DB,112 on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis 74HC4520DB,112 (PDF), hind 74HC4520DB,112, Pinout 74HC4520DB,112, manuaal 74HC4520DB,112 Ja 74HC4520DB,112 asenduslahendus.
74HC4520DB,112 FAQ
:
1. What is the function of the 74HC4520DB,112 semiconductor?
The 74HC4520DB,112 is a dual binary up-counter that features two independent counters, each with a divide-by-two and divide-by-eight section. It is commonly used in applications requiring frequency division and time measurement.
2. What are the key electrical characteristics of the 74HC4520DB,112?
The 74HC4520DB,112 operates within a wide voltage range (2V to 6V) and has low power consumption. It also offers high-speed operation and symmetrical output impedance.
3. How does the 74HC4520DB,112 differ from similar semiconductor devices?
Compared to similar devices, the 74HC4520DB,112 offers dual counter functionality, allowing for more versatile applications. Additionally, its wide operating voltage range sets it apart from other options.
4. What are the typical applications of the 74HC4520DB,112 semiconductor?
The 74HC4520DB,112 is commonly used in frequency division, time measurement, clock generation, and event counting applications. Its dual counter design makes it suitable for various digital systems.
5. What are the recommended operating conditions for the 74HC4520DB,112?
It is recommended to operate the 74HC4520DB,112 within the specified voltage range of 2V to 6V and at temperatures ranging from -40°C to 125°C. Proper decoupling capacitors should be used for stable operation.
6. How can the 74HC4520DB,112 be interfaced with other digital components?
The 74HC4520DB,112 can be easily interfaced with other digital components using standard logic level signals. Care should be taken to ensure proper voltage compatibility and signal integrity.
7. What are the important considerations for PCB layout when using the 74HC4520DB,112?
Proper ground and power plane layout, signal trace routing, and decoupling capacitor placement are crucial for ensuring optimal performance and noise immunity when using the 74HC4520DB,112.
8. Are there any specific ESD protection recommendations for handling the 74HC4520DB,112?
When handling the 74HC4520DB,112, it is important to follow ESD protection guidelines to prevent damage to the device. Utilizing ESD-safe handling procedures and equipment is highly recommended.
9. What are the potential failure modes of the 74HC4520DB,112 and how can they be mitigated?
Potential failure modes include overvoltage, undervoltage, and excessive current. These can be mitigated by adhering to the specified operating conditions and implementing appropriate protection circuitry.
10. Can the 74HC4520DB,112 be used in automotive or industrial applications?
Yes, the 74HC4520DB,112 is suitable for automotive and industrial applications due to its wide operating temperature range and robustness against environmental factors. However, adherence to relevant industry standards and guidelines is essential for these applications.
The 74HC4520DB,112 is a dual binary up-counter that features two independent counters, each with a divide-by-two and divide-by-eight section. It is commonly used in applications requiring frequency division and time measurement.
2. What are the key electrical characteristics of the 74HC4520DB,112?
The 74HC4520DB,112 operates within a wide voltage range (2V to 6V) and has low power consumption. It also offers high-speed operation and symmetrical output impedance.
3. How does the 74HC4520DB,112 differ from similar semiconductor devices?
Compared to similar devices, the 74HC4520DB,112 offers dual counter functionality, allowing for more versatile applications. Additionally, its wide operating voltage range sets it apart from other options.
4. What are the typical applications of the 74HC4520DB,112 semiconductor?
The 74HC4520DB,112 is commonly used in frequency division, time measurement, clock generation, and event counting applications. Its dual counter design makes it suitable for various digital systems.
5. What are the recommended operating conditions for the 74HC4520DB,112?
It is recommended to operate the 74HC4520DB,112 within the specified voltage range of 2V to 6V and at temperatures ranging from -40°C to 125°C. Proper decoupling capacitors should be used for stable operation.
6. How can the 74HC4520DB,112 be interfaced with other digital components?
The 74HC4520DB,112 can be easily interfaced with other digital components using standard logic level signals. Care should be taken to ensure proper voltage compatibility and signal integrity.
7. What are the important considerations for PCB layout when using the 74HC4520DB,112?
Proper ground and power plane layout, signal trace routing, and decoupling capacitor placement are crucial for ensuring optimal performance and noise immunity when using the 74HC4520DB,112.
8. Are there any specific ESD protection recommendations for handling the 74HC4520DB,112?
When handling the 74HC4520DB,112, it is important to follow ESD protection guidelines to prevent damage to the device. Utilizing ESD-safe handling procedures and equipment is highly recommended.
9. What are the potential failure modes of the 74HC4520DB,112 and how can they be mitigated?
Potential failure modes include overvoltage, undervoltage, and excessive current. These can be mitigated by adhering to the specified operating conditions and implementing appropriate protection circuitry.
10. Can the 74HC4520DB,112 be used in automotive or industrial applications?
Yes, the 74HC4520DB,112 is suitable for automotive and industrial applications due to its wide operating temperature range and robustness against environmental factors. However, adherence to relevant industry standards and guidelines is essential for these applications.
74HC4520DB,112 Seotud märksõnad
:
74HC4520DB,112 Hind
74HC4520DB,112 Maalimine
74HC4520DB,112 Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "74HC" seeria tooteid
